Clear Misfire TLC routine

WARNING: This page is about a different variant/trim than selected.

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Clear Misfire TLC" and follow the on screen instructions.
When complete, select "Monitors" tab at top of screen
Select "OBD II Monitors"
Select "Mis-Fire MON SCW"
1. Verify coolant temperature is above 60°C (140°F)
2. Observe the Misfire Monitor Status
3. Perform 6000 RPM WOT and let engine return to idle
4. Status will change from
  waiting
  
  to
  
  in progress
5. In Progress
  Verifies misfire is active and service is complete