LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (Aw60T Automatic Transmission (Service Information) - 500) >> Seal, Input Shaft >> Installation

Seal, Input Shaft: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153379Courtesy of CHRYSLER GROUP, LLC
  1. Using seal installer (special tool #10318, Installer, Pump Oil Seal) (1), install the oil pump seal.
  2. Install the torque convertor. Refer to INSTALLATION  .
  3. Install transmission to vehicle. Refer to INSTALLATION  .
scientia non olet · About LEMON Manuals