LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Aw60T (Hd) Automatic Transmission (Service Information) - 500) >> Knob, Gearshift >> Installation

Knob, Gearshift: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153082Courtesy of CHRYSLER GROUP, LLC
  1. Install the shifter knob (1) onto the shifter shaft (2) and seat fully, an audible click should be heard.
    GC0177164Courtesy of CHRYSLER GROUP, LLC
  2. Install a NEW  shifter knob retaining clamp (1b) and clamp with an appropriate tool.
  3. Firmly pull up on the knob to verify proper installation.
    GC0177165Courtesy of CHRYSLER GROUP, LLC
  4. Snap the shifter boot snap (1a) closed.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals