Section 43 (Audio/Video/Entertainment/Connectivity (Service Information) 500 - Electric): Amplifier: Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

Connect the amplifier electrical connectors (2).
Position the amplifier (3) to the mounting bracket (4) and install the retainers (1).

Courtesy of CHRYSLER GROUP, LLC
Install the amplifier trim cover (1) to the amplifier mounting bracket (2).
Connect the 12-volt negative battery cable.
Power up the high-voltage system. Refer to ELECTRIC VEHICLE CONTROL SYSTEM, STANDARD PROCEDURE .