LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Turbocharger System >> Sensor, Turbo Boost Pressure >> Installation

Sensor, Turbo Boost Pressure: Installation

WARNING: This page is about a different variant/trim than selected.
GC0155826Courtesy of CHRYSLER GROUP, LLC
  1. Install the boost pressure sensor (1) into the duct.
  2. Install the screw to secure the boost pressure sensor to the charge air cooler (CAC duct). Do not over tighten.
  3. Install the battery tray.
  4. Install the battery.
  5. Connect the battery cables.
scientia non olet · About LEMON Manuals