LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Lubrication >> Sensor, Oil Temperature >> Removal

Sensor, Oil Temperature: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner body (Refer to BODY, AIR CLEANER  .
    GC0152560Courtesy of CHRYSLER GROUP, LLC
  2. Unlock and disconnect the oil temperature sensor harness connector (1).
  3. Disengage the oil temperature harness connector from the bracket (2).
    GC0152505Courtesy of CHRYSLER GROUP, LLC
  4. Use an appropriate socket (2) and remove the oil temperature sensor (1).
    GC0152506Courtesy of CHRYSLER GROUP, LLC
  5. The oil temperature sensor gasket (1) can be reused if not damaged.
scientia non olet · About LEMON Manuals