LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Lubrication >> Sensor, Oil Temperature >> Installation

Sensor, Oil Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
GC0152506Courtesy of CHRYSLER GROUP, LLC
  1. The oil temperature sensor gasket (1) can be reused if not damaged. Lightly lubricate the sensor threads with clean engine oil.
    GC0152505Courtesy of CHRYSLER GROUP, LLC
  2. Use an appropriate socket (2) and install the oil temperature sensor (1). Tighten the oil temperature sensor to 18 N.m (13 ft. lbs.).
    GC0152560Courtesy of CHRYSLER GROUP, LLC
  3. Engage the oil temperature harness connector to the bracket (2).
  4. Connect and lock the oil temperature sensor harness connector (1).
  5. Install the air cleaner body

    Refer to BODY, AIR CLEANER, INSTALLATION .

scientia non olet · About LEMON Manuals