LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Lubrication >> Jet, Piston Oil Cooler >> Removal

Jet, Piston Oil Cooler: Removal

WARNING: This page is about a different variant/trim than selected.
GC0152691Courtesy of CHRYSLER GROUP, LLC
NOTE:

Piston oil cooler jet for cylinder one shown. Piston oil cooler jets for cylinders two, three and four are similar.

  1. Remove the piston and connecting rod(s). Refer to ROD, PISTON AND CONNECTING, REMOVAL .
  2. Remove the crankshaft. Refer to CRANKSHAFT, REMOVAL .
  3. Using a suitable drift (1), drive the piston oil cooler jet(s) (2) from the engine block.
  4. Discard the piston oil cooler jet(s), they are not reusable.
scientia non olet · About LEMON Manuals