LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Engine Block >> Seal, Crankshaft Oil, Front >> Removal

Seal, Crankshaft Oil, Front: Removal

WARNING: This page is about a different variant/trim than selected.
GC0152674Courtesy of CHRYSLER GROUP, LLC
CAUTION:

When the timing belt is removed and the cylinder head is still installed, DO NOT rotate the camshaft or crankshaft without first locating the proper crankshaft position. Failure to do so will result in valve or piston damage.

  1. Remove the crankshaft sprocket (4). Refer to SPROCKET(S), TIMING BELT AND CHAIN, REMOVAL .
    GC0152678Courtesy of CHRYSLER GROUP, LLC
  2. Remove the front crankshaft seal (1).
scientia non olet · About LEMON Manuals