LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Cylinder Head >> Rocker Arm, Valve >> Removal

Rocker Arm, Valve: Removal

WARNING: This page is about a different variant/trim than selected.
GC0152613Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the variable valve actuation assembly. Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, REMOVAL .
    NOTE:

    If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

  3. Disengage the retaining clip and remove the rocker arm(s) (1).
scientia non olet · About LEMON Manuals