LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (1.4L 16-Valve Turbo Engine (Service Information) - 500) >> Cylinder Head >> Housing, Camshaft Bearing >> Inspection

Housing, Camshaft Bearing: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the valve tappets move freely in theirs bores and that they have been rotating.
  2. Inspect camshaft bearing journals for scoring.
  3. Inspect the following components and verify that they are within specification : Refer to SPECIFICATIONS  .
    • Camshafts
    • Valve Tappets
scientia non olet · About LEMON Manuals