Possible Causes
WARNING: This page is about a different variant/trim than selected.
| Possible Causes |
|---|
| DTCS RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES |
| BCM NOT CONFIGURED CORRECTLY |
| IC POWER AND GROUND |
| INSTRUMENT CLUSTER (IC) |
| MODULE THAT SET THE DTC |
WARNING:
On vehicles equipped with the high voltage system, disconnecting the 12 volt battery negative cable alone will not power down the 12 volt system. You must perform the 12 volt Power Down procedure before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.