LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Lamps/Lighting - Exterior (Service Information) 500 - Electric) >> Diagnosis And Testing >> Exterior Lighting >> Hazard Warning Lamps

Hazard Warning Lamps

WARNING: This page is about a different variant/trim than selected.
CONDITION POSSIBLE CAUSES CORRECTION
HAZARD WARNING LAMPS DO NOT FLASH 1. Ineffective hazard warning switch. 1. Test and replace hazard warning switch (upper instrument panel switch pod) if required.
2. Ineffective BCM inputs or outputs. 2. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to the appropriate diagnostic information.
HAZARD WARNING LAMPS DO NOT STOP FLASHING 1. Ineffective hazard warning switch. 1. Test and replace hazard warning switch (upper instrument panel switch pod) if required.
2. Ineffective BCM inputs or outputs. 2. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to the appropriate diagnostic information.
scientia non olet · About LEMON Manuals