LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 E >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Frame And Bumpers - 500 - Electric >> Under Body Protection >> Shield, Underbody >> Installation

Shield, Underbody: Installation

GC0157896Courtesy of CHRYSLER GROUP, LLC
  1. Position the underbody shield (1) to the vehicle.
  2. Install the four fasteners securing the underbody shield to the floor. Tighten fasteners securely.
  3. Install the four fasteners that secure the underbody shield to the battery. Tighten the fasteners securely
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals