U195A-83-Message Counter CRC Fault In DASM Info From Driver Assistant System Module - Value Of Signal Protection Calculation Incorrect
Perform the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION PRE-DIAGNOSTIC PROCEDURE .
NOTE:
This DTC indicates that the Adaptive Cruise Control (ACC) module is not sending the required information over the CAN bus. Therefore, the ACC module is considered to be the "offending module". The "offending module" will be referred to in the COMMUNICATION PRE-DIAGNOSTIC procedure.
NOTE:
Treat this DTC as a INVALID DATA DTC when performing the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE.