Damper, Vibration: Installation: Installation

Fig 1: Vibration Damper & Bolts

Courtesy of CHRYSLER GROUP, LLC

1. Align the locator pin on the crankshaft sprocket with the hole in the vibration damper (1). Install the vibration damper (1) with three bolts (2) tightened to 25 N.m (19 ft. lbs.).
   Fig 2: Drive Belt Tensioners & Assembly With Drive Belt Routing

   Courtesy of CHRYSLER GROUP, LLC
2. Install the accessory drive belt (4). Refer to BELT, SERPENTINE, INSTALLATION .
   Fig 3: Right Vertical Brace, Frame Splash Shield & Fasteners

   Courtesy of CHRYSLER GROUP, LLC
3. Install the frame splash shield (3) with three screws (1).
4. Install two screws (2) to the front wheelhouse splash shield.
5. Install the right vertical brace (5) with two bolts (4) tightened to 45 N.m (33 ft. lbs.).
   Fig 4: Wheel Lug Bolts

   Courtesy of CHRYSLER GROUP, LLC
6. Install the right front wheel and tire assembly. Refer to INSTALLATION .