LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500L Pop, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (C635 Manual Transmission (Service Information) 500L) >> Switch, Backup Lamp >> Installation >> Installation

Switch, Backup Lamp: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Backup Lamp Switch Connector & Backup Lamp Switch
GC0147963Courtesy of CHRYSLER GROUP, LLC
  1. Install the backup lamp switch (1) and tighten to the proper specification. Refer to SPECIFICATIONS .
  2. Connect the backup lamp switch wire harness connector (2).
  3. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), install sensor.
scientia non olet · About LEMON Manuals