LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500L Lounge >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L Turbo Engine (Service Information) 500L >> Cylinder Head >> Lifter(S), Hydraulic >> Installation >> Installation

Lifter(S), Hydraulic: Installation: Installation

Fig 1: Hydraulic Lifters
GC0152612Courtesy of CHRYSLER GROUP, LLC
NOTE:

If the hydraulic lifters are being reused, reassemble them into their original locations.

  1. Verify that the hydraulic lifters are at least partially full of oil. There should be little or no plunger travel when the hydraulic lifter is depressed.
  2. Install the hydraulic lifter(s) (1).
  3. Install the camshaft(s). Refer to CAMSHAFT, ENGINE, INSTALLATION .
  4. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals