Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. With the scan tool, read Amplifier DTCs and record on the repair order.
2. With the scan tool, erase DTCs.
3. Using the When Monitored and Set Conditions above, operate the vehicle in the conditions that set the DTC.
4. With the scan tool, read Amplifier DTCs.
  Did the DTC return?
  
  Yes
  - Go To 2
  No
  - Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to INTERMITTENT CONDITION
CHECK THE AMPLIFIER OPERATION
1. Check that the Amplifier is working correctly. The system detects excessive temperature.
  Is the Amplifier working correctly?
  
  Yes
  - Allow the Amplifier to cool until acceptable temperature is reached.
  No
  - End of diagnosis.