LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500L Easy, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L Turbo Engine (Service Information) 500L >> Lubrication >> Switch, Oil Pressure >> Removal >> Removal

Switch, Oil Pressure: Removal: Removal

NOTE:

The oil pressure switch has a lock patch on the threads and if removed can not be reinstalled.

  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle.

    Refer to HOISTING, STANDARD PROCEDURE .

    Fig 1: Right Vertical Brace, Frame Splash Shield & Fasteners
    GC0153366Courtesy of CHRYSLER GROUP, LLC
  3. Remove two bolts (4) and the right vertical brace (5).
  4. Remove the two screws (2) from the front wheelhouse splash shield.
  5. Remove the three screws (1) and the frame splash shield (3).
  6. Disconnect the oil pressure switch electrical connector (1).
    Fig 2: Oil Pressure Switch & Connector
    GC0152695Courtesy of CHRYSLER GROUP, LLC
  7. Remove the oil pressure switch (2) from the oil pump housing.
scientia non olet · About LEMON Manuals