LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Clutch System - 500) >> Cylinder, Clutch Slave >> Removal >> C510

Cylinder, Clutch Slave: Removal: C510

WARNING: This page is about a different variant/trim than selected.
  1. Remove transaxle from the vehicle.
  2. Place the transaxle on a bench.
    Fig 1: Concentric Slave Cylinder (CSC) Boot
    GC0153663Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Concentric Slave Cylinder (CSC) boot (1) from the bell housing.
    Fig 2: CSC Retention Tabs
    GC0153664Courtesy of CHRYSLER GROUP, LLC
  4. Release the retention tabs from the CSC (1).
    Fig 3: CSC Bolts
    GC0153665Courtesy of CHRYSLER GROUP, LLC
  5. Remove the CSC bolts (1).
    Fig 4: Remove/Install CSC
    GC0153666Courtesy of CHRYSLER GROUP, LLC
  6. Remove the CSC from the case.
scientia non olet · About LEMON Manuals