LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Clutch System - 500) >> Cylinder, Clutch Slave >> Installation >> C510

Cylinder, Clutch Slave: Installation: C510

WARNING: This page is about a different variant/trim than selected.
Fig 1: Remove/Install CSC
GC0153666Courtesy of CHRYSLER GROUP, LLC
  1. Install the Concentric Slave Cylinder (CSC) to the case.
    Fig 2: CSC Bolts
    GC0153665Courtesy of CHRYSLER GROUP, LLC
  2. Install the CSC bolts (1).
    Fig 3: CSC Retention Tabs
    GC0153664Courtesy of CHRYSLER GROUP, LLC
  3. Release the retention tabs to the CSC (1).
    Fig 4: Concentric Slave Cylinder (CSC) Boot
    GC0153663Courtesy of CHRYSLER GROUP, LLC
  4. Install the (CSC) boot to the bell housing.
  5. Install the transmission. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals