Sensor, Wheel Speed, Rear: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Wheel Speed Sensor Cable Connectors

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before proceeding, refer to CAUTION and WARNING .

Raise and support the vehicle. Refer to STANDARD PROCEDURE .
Disconnect the wheel speed sensor cable connector (1) at the body wiring harness connector (2).

Fig 2: Spindle To Axle Bolts & Rear Wheel Speed Sensor Screw
Courtesy of CHRYSLER GROUP, LLC
Separate the wheels speed sensor cable from all retainers and clips.
Remove the screw (2) fastening the wheel speed sensor head in the spindle assembly. Remove the sensor from the vehicle.