LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Engine Block >> Crankshaft >> Standard Procedure >> Crankshaft End Play

Crankshaft End Play

WARNING: This page is about a different variant/trim than selected.
Fig 1: Measuring Crankshaft End Play
GC0152752Courtesy of CHRYSLER GROUP, LLC
  1. Mount a dial indicator (1) to a stationary point at the front of the engine. Locate the probe perpendicular against the nose of the crankshaft.
  2. Move the crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move the crankshaft forward to the limit of travel and read the dial indicator. Compare the measured end play to the specification. Refer to ENGINE SPECIFICATIONS .
    NOTE:

    Crankshaft thrust washers are not selectable and are only available in a single thickness.

scientia non olet · About LEMON Manuals