LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Cylinder Head >> Valves, Intake And Exhaust >> Inspection >> Inspection >> Valves

Valves, Intake And Exhaust: Inspection: Inspection: Valves

WARNING: This page is about a different variant/trim than selected.
  1. Inspect the valves for wear or damage. Install new valves as necessary.
    Fig 1: Inspecting Valve Margin
    GC0144259Courtesy of CHRYSLER GROUP, LLC
  2. Inspect the retainer lock grooves for wear or damage (2). Install new valve if necessary.
  3. Inspect the valve face (4) for wear and pitting. Install new valve if necessary.
  4. Measure the valve stems (3) and margins (5) for wear. Refer to ENGINE SPECIFICATIONS . Install new valve if necessary.
scientia non olet · About LEMON Manuals