LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Cylinder Head >> Camshaft, Engine >> Standard Procedure >> Standard Procedure - Camshaft End Play >> Notes

Standard Procedure - Camshaft End Play: Notes

WARNING: This page is about a different variant/trim than selected.
Fig 1: Measuring Camshaft End Play
GC0152594Courtesy of CHRYSLER GROUP, LLC
  1. Remove the cylinder head cover. Refer to COVER(S), CYLINDER HEAD, REMOVAL .
  2. Mount Dial Indicator Set (special tool #C-3339A, Set, Dial Indicator) (1) to a stationary point at the front of the engine. Locate the probe perpendicular against the nose of the camshaft.
  3. Move the camshaft all the way to the rear of its travel.
  4. Zero the dial indicator.
  5. Move the camshaft forward to the limit of travel and read the dial indicator. Compare the measured end play to the specification. Refer to ENGINE SPECIFICATIONS .
scientia non olet · About LEMON Manuals