LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Pop, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Battery System (Service Information) 500 - Except Electric) >> Tray, Battery >> Removal >> Removal

Tray, Battery: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Thermo Cover & Battery
GC0152855Courtesy of CHRYSLER GROUP, LLC
  1. Remove the battery (2). Refer to BATTERY, REMOVAL .
    Fig 2: PCM Electrical Connectors
    GC0152393Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the powertrain control module (PCM) electrical connectors (1 and 2).
    Fig 3: Battery Tray, Connectors, Retainers, Nut & Bolts
    GC0152563Courtesy of CHRYSLER GROUP, LLC
  3. Disengage two starter wire harness retainers (6) from the battery tray (3).
  4. Disengage two engine wire harness retainers (4) from the battery tray (3).
  5. Disengage the engine wire harness connector (2) from the battery tray (3) and reposition the wire harness.
  6. Remove the nut (5) and two bolts (1).
  7. Remove the battery tray.
scientia non olet · About LEMON Manuals