LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Easy, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (Heated Seats (Service Information) 500 - Electric) >> Relay, Heated Seat >> Installation >> Installation

Relay, Heated Seat: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Heated Seat Relay, Relay Receptacle, Cover & Front Seat
GC0152987Courtesy of CHRYSLER GROUP, LLC
  1. Position the heated seat relay (2) to the relay receptacle (3).
  2. Align the heated seat relay terminals with the terminal cavities in the receptacle and push down firmly on the relay until the terminals are fully seated.
  3. Install the cover (1) onto the relay receptacle. Make sure the cover is fully engaged.
  4. Connect the 12 volt negative battery cable.
  5. Power up the high voltage system. Refer to ELECTRIC VEHICLE CONTROL SYSTEM, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals