LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Easy, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Emissions Control - 500) >> Evaporative Emissions - 1.4L 16-Valve Turbo (EAF) >> Solenoid, Evaporative Emissions Purge >> Removal >> Removal

Solenoid, Evaporative Emissions Purge: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Cleaner Assembly, Intake Hose, Fittings & Clamp
GC0153787Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body (1). Refer to BODY, AIR CLEANER, REMOVAL .
    Fig 2: Purge Flow Control Solenoid & Bracket
    GC0156078Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the purge solenoid (1) wire harness connector (3).
  4. Disconnect the vapor line (2) from the purge solenoid (1). Refer to STANDARD PROCEDURE .
  5. Disconnect the vacuum hose (5) from purge solenoid (1).
  6. Remove the purge solenoid (1) from the intake manifold support bracket (4).