LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 c Easy, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Wiper System & Washer System (Service Information) 500 - Electric) >> Check Valve, Washer >> Removal >> Removal

Check Valve, Washer: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cowl Plenum Cover/Grille Panel, Front Washer System Check Valve & Two Washer Nozzle Hoses
GC0153291Courtesy of CHRYSLER GROUP, LLC
  1. Remove the cowl plenum cover/grille panel (1) from over the cowl plenum. Refer to COVER, COWL PANEL, REMOVAL .
  2. From the underside of the cowl plenum cover/grille panel, disconnect the engine compartment and the two washer nozzle hoses (3) from the three barbed nipples of the front washer system check valve (2).
  3. Remove the check valve from the underside of the cowl plenum cover/grille panel.
scientia non olet · About LEMON Manuals