Pedal, Accelerator: Removal: Removal

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accelerator Pedal Assembly, Connector, Mounting Studs & Nuts

Courtesy of CHRYSLER GROUP, LLC

The Accelerator Pedal Position Sensor (APPS) and the accelerator pedal is serviced as a complete assembly including the bracket.

Disconnect electrical connector (1) at the APPS (2).
Remove the three accelerator pedal retaining bracket nuts (3) and remove the accelerator pedal assembly (4) from the mounting studs (5).