Module, Radio Receiver: Installation: Installation

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Electrical Connectors & Antenna Connectors

GC0152861

Courtesy of CHRYSLER GROUP, LLC

Connect the antenna connector(s) (2).
Connect the radio electrical connectors (1).
Insert the radio into the instrument panel until it locks into place.

Fig 2: Radio Buttons
Courtesy of CHRYSLER GROUP, LLC
Install the radio buttons.
Connect the negative battery cable.

NOTE:

The radio must be programmed after a radio replacement. Refer to MODULE, RADIO RECEIVER, MODULE PROGRAMMING .