Cover, Header: Removal: Removal
WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the dome lamp and power top switch. Refer to SWITCH, POWER TOP, FULL OPEN RETRACTABLE ROOF, REMOVAL .
- Remove the visor (2) and visor support. Refer to VISOR, REMOVAL and SUPPORT, VISOR, REMOVAL .
- Remove the rivet (2) located in the dome lamp cavity securing the front header cover (1) to the roof header.
- Using (special tool #C-4755, Trim Stick) or equivalent, disengage the retaining clips located under the visor support cavities and remove the front header cover (1).