LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 ((Antilock Brake System (Abs) - Electrical Diagnostics - 500 - Electric)) >> DTC Troubleshooting >> C10CE-02-Brake Switch - General Signal Failure >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

Brake switch is active and following conditions are true when Master Cylinder Pressure is less than 6.2 bar (90 psi) for two minutes and throttle position is greater than 20 % then vehicle Acceleration is greater than 0.4 m/s for two seconds.

scientia non olet · About LEMON Manuals