Set Condition
WARNING: This page is about a different variant/trim than selected.
This code will set, if the ORC and the Driver Door Pressure Sensor (Satellite) do not establish and maintain valid data communications. The DTC will become Active after the fault has set for a minimum of 100 milliseconds (ms). The DTC will go to Stored after the ORC to Driver Door Pressure Sensor (Satellite) communication fault has been removed or the suspect pressure sensor has been replaced. The clearing of this fault is immediate upon the suspect internal error being removed or the suspect sensor replaced. The Multifunction Indicator Lamp (MIL) will set in the instrument cluster.