Red Brake Warning Indicator
WARNING: This page is about a different variant/trim than selected.
| CONDITION | POSSIBLE CAUSES | CORRECTION |
|---|---|---|
| RED BRAKE WARNING INDICATOR ON | 1. Parking brake lever not fully released. | 1. Release parking brake lever. |
| 2. Parking brake warning switch on parking brake lever. | 2. Inspect and replace switch as necessary. | |
| 3. Brake fluid level low in reservoir. | 3. Fill reservoir. Check entire system for leaks. Repair or replace as required. | |
| 4. Brake fluid level switch. | 4. Disconnect switch wiring connector. If lamp goes out, replace switch. | |
| 5. Mechanical instrument cluster (MIC) problem. | 5. Refer to appropriate diagnostic information. | |
| 6. ABS EVBP malfunction. | 6. Refer to ANTILOCK BRAKE SYSTEM (ABS) - SERVICE INFORMATION - 500 - ELECTRIC and appropriate diagnostic information. |