Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Crossmember Mounting Bolts | 165 | 122 | - | |
| Crossmember Mounting Bolts - Above Control Arms | 125 | 92 | - | |
| Hub Nut | 310 | 229 | - | |
| Lower Ball Joint Stud Pinch Bolt | 65 | 48 | - | |
| Lower Control Arm Front Pivot Bolt | 110, Plus 45° | 80, Plus 45° | - | |
| Lower Control Arm Rear Pivot Bolt | 110, Plus 45° | 80, Plus 45° | - | |
| Stabilizer Bar Cushion Retainer Screws | 25 | 18 | - | |
| Stabilizer Bar Link Nuts | 50 | 37 | - | |
| Strut Clevis-to-Knuckle Nuts | 75 | 55 | - | |
| Strut Rod Nut | 65 | 48 | - | |
| Strut-to-Tower Nut | 55 | 41 | - | |
| Tie Rod Adjuster Jam Nut | 34 | 25 | - | |
| Tie Rod End-to-Knuckle Nut | 40 | 30 | - | |
| Tunnel Support Brace Mounting Bolts | 100 | 74 | - | |
| Vertical Support Brace Mounting Bolts | 45 | 33 | - | |
| Wheel Mounting (Lug) Bolts - Aluminum Wheels | 100 | 75 | - | |
| Wheel Mounting (Lug) Bolts - Steel Wheels | 85 | 63 | - |