Fastener Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft Lbs | In Lbs | COMMENT |
|---|---|---|---|---|
| Ball Joint Stud Pinch Bolt | 65 | 48 | - | |
| Front Crossmember Mounting Bolts - Above Control Arms | 125 | 92 | - | |
| Front Crossmember Mounting Bolts - Rear | 165 | 122 | - | |
| Intermediate Shaft Pinch Bolt | 55 | 40 | - | |
| Rear Engine Mount Isolator Bolt | 130 | 96 | - | |
| Rear Engine Isolator Mounting Bracket Bolts | 60 | 44 | - | |
| Hub nut | 310 | 229 | - | |
| Lower Control Arm Front Pivot Bolt | 110, Plus 45° | 80, Plus 45° | - | |
| Lower Control Arm Rear Bolt | 110, Plus 45° | 80, Plus 45° | - | |
| Outer Tie Rod to Knuckle Nut | 40 | 30 | - | |
| Stabilizer Bar Cushion Retainer | 25 | 18 | - | |
| Stabilizer Bar Link Nuts | 50 | 37 | - | |
| Steering Gear Mounting Bolts | 75 | 55 | - | |
| Strut Clevis-to-Knuckle Nuts | 75 | 55 | - | |
| Tunnel Support Brace Mounting Bolts | 100 | 74 | - | |
| Wheel Mounting (Lug) Bolts - Aluminum Wheels | 100 | 75 | - | |
| Wheel Mounting (Lug) Bolts - Steel Wheels | 85 | 63 | - |