LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Electric Powertrain System - 500 - Electric) >> Electric Vehicle Drive Unit >> Mount, Motor >> Removal >> Right

Mount, Motor: Removal: Right

WARNING: This page is about a different variant/trim than selected.
  1. Remove the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
    Fig 1: Washer Bottle Bolts
    GC0157809Courtesy of CHRYSLER GROUP, LLC
  2. Remove the two washer bottle bolts (1) and position the washer bottle aside.
    Fig 2: Battery Coolant Heater (BCH) Nuts & Ground Strap Bolt
    GC0157840Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Battery Coolant Heater (BCH) ground strap bolt (1).
  4. Remove the two BCH nuts (2).
  5. Support the electric motor with a suitable transmission jack, or similar.
    Fig 3: RH Front Motor Mount Through-Bolt
    GC0157753Courtesy of CHRYSLER GROUP, LLC
  6. Remove the right motor mount through-bolt (1).
  7. Remove the three right motor mount bolts (2), and remove the right motor mount (1)

    .

scientia non olet · About LEMON Manuals