LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Wiper System & Washer System (Service Information) 500 - Electric) >> Nozzle, Washer >> Removal >> Front

Nozzle, Washer: Removal: Front

WARNING: This page is about a different variant/trim than selected.
Fig 1: Cowl Plenum Cover/Grille Panel, Hose Connection, Barbed Nipple & Latch Features
GC0153304Courtesy of CHRYSLER GROUP, LLC
  1. Remove the cowl plenum cover/grille panel (3) from the vehicle. Refer to COVER, COWL PANEL, REMOVAL .
  2. From the underside of the cowl plenum cover/grille panel, disconnect the hose connection (1) from the barbed nipple (2) of the front washer nozzle.
  3. From the underside of the cowl plenum cover/grille panel, release the five integral latch features (4) of the front washer nozzle and push the nozzle out through the mounting hole toward the top side of the panel.
  4. Remove the front washer nozzle from the top of the cowl plenum cover/grille panel.
scientia non olet · About LEMON Manuals