Nozzle, Washer: Description: Front
The front washer nozzles (1) are constructed of molded plastic. Each nozzle has five integral latches (4) that secure them in dedicated square holes in the cowl plenum cover/grille panel located near the base of the windshield. The domed upper surface of the washer nozzle is visible on the top of the plenum cover/grille panel, and the three orifices of each nozzle are oriented towards the windshield glass. The washer plumbing fittings (3) for the washer nozzles extend below the cowl plenum cover/grille panel. The cowl plenum cover/grille panel must be removed from the vehicle to access the nozzles for service.
The front washer nozzles also have an adjustment screw (2) located on the left side of each nozzle that allow the streams emitted by the nozzle to be aimed into the wipe pattern on the windshield. The front washer nozzles cannot be repaired. If ineffective or damaged, they must be replaced.