Sensor, Oil Temperature: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Electronic Throttle Control, Connector, Clip & Bolts

Courtesy of CHRYSLER GROUP, LLC

Remove the throttle body (4). Refer to THROTTLE BODY, REMOVAL .

Fig 2: Oil Temperature Sensor Electrical Connector & Bracket
Courtesy of CHRYSLER GROUP, LLC
Unlock and disconnect the oil temperature sensor harness connector (1).
Disengage the oil temperature harness connector from the bracket (2).

Fig 3: Remove/Install Oil Temperature Sensor
Courtesy of CHRYSLER GROUP, LLC
Use an appropriate socket (2) and remove the oil temperature sensor (1).

Fig 4: Oil Temperature Sensor Gasket
Courtesy of CHRYSLER GROUP, LLC
The oil temperature sensor gasket (1) can be reused if not damaged.