LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Electronic Control Modules (Service Information) 500 - Electric) >> Standard Procedure >> Program The IPC (Instrument Panel Cluster)

Program The IPC (Instrument Panel Cluster)

WARNING: This page is about a different variant/trim than selected.
  1. Connect the scan tool.
  2. Check vehicle for DTC's.
  3. Clear all stored DTC's.
  4. Turn car OFF then ON and confirm DTC's are gone.
  5. From the Vehicle View, Click on the IPC icon >> Misc. Functions >> Proxi Configuration

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals