LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 ((Power Inverter Module (PIM) - Electrical Diagnostics - 500 - Electric)) >> Standard Procedure >> Exclude Possibility Of Influence Of Resolver Faults

Exclude Possibility Of Influence Of Resolver Faults

WARNING: This page is about a different variant/trim than selected.
  1. Check PIM Failure Code Memory for additional entries of Resolver Angle Sensor DTCS, P0A40, P0A1B (multiple error DTC), P0A3F, P1B03.
  2. If DTCs mentioned above are present, follow the repair actions for those DTC's prior to proceeding to step 3.
  3. Delete all fault codes, perform test drive.
  4. If DTC of interest is still present, go back to step 1 otherwise, diagnostics of DTC of interest is complete.
scientia non olet · About LEMON Manuals