Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

CHECK FOR AN ACTIVE DTC

NOTE:

This is an informational DTC and may set if the ORC module determined an event occurred requiring FPS activation. Prior to diagnosing this DTC, repair all other DTCs or repair the vehicle as necessary.

With the scan tool, read Body Control Module (BCM) DTCs and record on the repair order.
Is the DTC as active?

Yes
- If the scan tool still displays this DTC as active after all other repairs have been completed, replace the BCM in accordance with the Service Information. Refer to MODULE, BODY CONTROL, REMOVAL .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .