Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
TEST FOR INTERMITTENT CONDITION
- With the scan tool, record and erase the DTCs.
- Be sure the ignition is on.
- Wait 30 seconds.
- With the scan tool, read the active DTCs.
Does the scan tool display This DTC as active?
Yes
- Replace and program the RKE Fob in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete. The condition or conditions that originally set this DTC are not present at this time. The RKE Fob that set this code is not presently in the ignition.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .