Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
TEST FOR INTERMITTENT CONDITION
- With the scan tool, record and erase the DTCs.
- Be sure the ignition is on.
- Wait 30 seconds.
- With the scan tool, read the active DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace and program the RKE Fob in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete. the condition or conditions that originally set this DTC are not present at this time. The RKE Fob that set this code is not present in the ignition at this time.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .