LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2016 >> 500 Turbo, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Body Control Module (BCM) - DTCS B106A-19 To B2229-62 - 500 - Electric) >> DTC Troubleshooting >> B16AF-18-Left Stop Lamp Control - Under Current >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different variant/trim than selected.

The Body Control Module (BCM) receives a hardwired brake signal from the Stop Lamp Switch indicating that the Brake Pedal is applied. When this signal is received, the BCM provides a voltage output through the rear stop signal control circuit. For additional information on the Brake Lamp operation. Refer to BRAKE LAMPS .

scientia non olet · About LEMON Manuals