Positive Battery

WARNING: This page is about a different variant/trim than selected.

Fig 1: PDC Lid Retainer & Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative and positive battery cables.
Remove the PDC lid retainer (1).
Remove the PDC cover (2).

Fig 2: B+ Retainer & Cable
Courtesy of CHRYSLER GROUP, LLC
Remove the B+ retainer (1) and remove the B+ cable (2).

Fig 3: Belly Pan
Courtesy of CHRYSLER GROUP, LLC
Remove the belly pan (1) covering the bottom side of the engine compartment.

Fig 4: Starter Solenoid, Connector & Retainer
Courtesy of CHRYSLER GROUP, LLC
Remove the retainer (1) from the starter solenoid (3).
Disconnect the starter solenoid harness connector (2).