Diagnostic Test

WARNING: This page is about a different car, the 2015 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.

TEST FOR INTERMITTENT CONDITION

With the scan tool, record and erase the DTCs.
Be sure the ignition is on.
Wait 30 seconds.
With the scan tool, read the active DTCs.
Does the scan tool display this DTC as active?

Yes
- Replace the Headlamp Switch in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to BODY CONTROL MODULE (BCM) - BODY VERIFICATION TEST - 500 - ELECTRIC .
No
- Test complete. The condition or conditions that originally set this DTC are not present at this time.
- Perform the BODY VERIFICATION TEST. Refer to BODY CONTROL MODULE (BCM) - BODY VERIFICATION TEST - 500 - ELECTRIC .